The new Gaming Headset HyperX Cloud Core is designed primarily for fans of computer games, which is important for comfort during long gaming session – its ear pads are made of artificial leather and memory foam, and is equipped with a padded headband that ensures both a reliable fixation of the headset on your head, and convenience when playing for a long time. The closed design and 53 mm speakers with neodymium magnets provide a truly audiophile-grade sound quality with powerful bass and clear treble, acoustic parameters of the new Gaming Headset are similar to the HyperX Cloud.

For ease of use, enhance and expand the scope of the desk with a microphone new Gaming Headset made removable – when watching a movie or listening to music, the microphone will not interfere. To connect the headset to the sound source HyperX Cloud Core is equipped with a 4-pin plug with a diameter of 3.5 mm standard CTIA, layout compatible with audio outputs of personal computers, game consoles and mobile devices. Connects to your PC previous standards with separate headphone and microphone set comes with two-foot extension cable plug diameter of 3.5 mm.

As a new Gaming Headset has been certified TeamSpeak – Host for gaming negotiations on VoIP. In developing this model, HyperX engineers put the main task of creating the most comfortable for the user’s headset with high-quality sound and the most affordable price – recommended retail price HyperX Cloud Core is $ 70.

Specifications new Gaming Headset HyperX Cloud Core:

• Speaker type: Dynamic Æ53 mm, with neodymium magnets
• Construction: closed
• Frequency response: 15-25 000 Hz
• Nominal Impedance: 60 Ohm system
• Nominal sound pressure level: 98 ± 3 dB
• Distortion: <2%
• Maximum power: 150 mW
• Headphones Type: cover
• The suppression of ambient noise: 20 dBA
• Pressure headband: 5 N
• Weight with microphone and cable: 320g
• The length and type of cable: 1 m + 2 m extension cable
• Connection: stereo mini-jack and microphone Æ3.5 mm (4-pin)

Microphone

• Sensor Type: Condenser (electret reverse)
• Principle of operation: Pressure gradient
• Polar pattern: cardioid
• Power supply: Power AB
• Power supply: 2
• Current consumption: max. 0.5 mA
• Nominal impedance: 2.2 ohms
• Open circuit voltage: at 1 kHz 20 mV / Pa
• Frequency response: 50-18000 Hz
• THD 2% at a frequency of 1 kHz
• Max. sound pressure level of 105 dB SPL (THD £ 1,0% at 1 kHz)
• Out Microphone: -39 ± 3 dB
• The length of the microphone: 150 mm (with the stand)
• Diaphragm Diameter: 6 mm
• Connection: single mini-plug (Æ3.5 mm)

Source: kingston

The post It announced a new Gaming Headset HyperX Cloud Core appeared first on Raqwe.

Still hot press releases issued by the Company on the occasion of the official announcement of the new line of memory – HyperX FURY DDR4, and we tested already arrived 4-channel Kit HyperX FURY HX424C15FBK4 / 32. Set DDR4-2400 32GB – a good reason to explore the possibilities of new sets of RAM developed progressive division of Kingston.

DDR4 memory standard currently used for categorical platform LGA2011-v3. Chips Haswell-E family are four-channel memory controller. Decisions on the basis of the CPU will work with any number of modules (1-8), but the full potential of the memory system is disclosed in the presence of 4 or 8 bars DDR4. In this case, use all available links, allowing you to get the maximum bandwidth. For this reason, it is a 4-channel kit DDR4 represent a coherent set, the choice of which is justified in the assembly system on the platform LGA2011-v3.

32 GB – an impressive amount. However, the PC 6/8-core Intel processors are likely to be used to solve non-standard-intensive tasks. For office applications or even games, such RAM is redundant, but for serious work with graphics and video memory does not happen much.

Set HyperX FURY HX424C15FBK4 / 32 comes in a plastic container with a transparent top cover, through which the silhouettes guessed modules. However, a major review of the closing of the data labels and stickers who report their certification Intel XMP.

After removing the cover, you can watch four memory strip held plastic guide.

Memory modules – not those devices that require additional configuration. The package comes with a set of only a brief guide for quick installation brackets memory and a small sticker with the logo of HyperX.

Feature modules HyperX FURY DDR4 – automatic adjustment of the set mode. Set to work with a rated speed, you just need to install them into the motherboard. In this case, do not even need to go into the BIOS and select the available XMP-profile. Tables JEDEC is initially prescribed values corresponding to the recommended mode. In this case, DDR4-2400, 15-15-15-32, 1.2 V. In other words, the modules are not initially start working with the lowest available frequency (2133 MHz), and with the standard.

Of course, a set of support XMP, because too much difficulty would not have arisen and novice users. However, to change even one item in the BIOS need a basic knowledge of your system, but they are not all PC owners. In the case of HyperX, FURY DDR4 implemented the idea of Plug-and-Play – after connecting the optimum mode is automatically installed.

The modules are made on the basis of black textile. Trims are equipped with a line of HyperX FURY compact aluminum radiator asymmetrical shape. Despite the fact that DDR4 generally the less energy-intensive type of RAM than DDR3, additional cooler not exactly hurt.

Terms and conditions of modules can be very different. In the compact body badly blown seriously charged top-end components, internal temperatures may be far from ideal. Because additional radiator will still relevant. Especially considering that, in this case, the heat sink increases the overall height of the entire module to 3 mm. This is a distinct advantage of this line modules.

Oversized radiators may look even more impressive, but can sometimes cause serious problems when installing overall CPU coolers. If we consider that with Haswell-E will certainly be used “sweeping” coolers, the value of the compact radiators on the HyperX FURY DDR4 is even higher.

It should be noted that the radiator modules series HyperX FURY DDR4 have only black color, choose the color scheme in accordance with the decor of the motherboard complicated. On the other hand, is a universal solution. 99.9% of the boards is now made on a black PCB because noir-style units will not fall out of the overall color scheme of the system.

For planks used chips Hynix series H5AN4G8NNMFR. On both sides of planks placed on the chip 8 4 GB each. The total volume of the module – 8 GB.

Test modules are assembled in Taiwan. Some leniency to the capabilities of the device to collect high quality in mainland China can be called biased, but capacious «Assembled in Taiwan» on a subconscious level is still working. Modules left the assembly line at 4 weeks of this year.

On one side of the radiator has a sticker with the name of a set of memory and the nominal supply voltage. Part sticker allocated under the protective area with the logo of the series. Nearby there is a reminder that the HyperX is a subsidiary of Kingston.

Except on the top module has a “game” in the light engraved with the logo of HyperX. Accurately identify the manufacturer of the memory will be easy even through the transparent wall of the enclosure.

Modules feature standard DDR4 – curved edge PCB in the central part. Given the large number of contacts for a given type of RAM such profile strips should simplify the installation by reducing the force required to secure the module in the slot.

When using a four-channel mode, the memory subsystem can provide an impressive capacity. At DDR4-2400 is about 50 GB / c for read / write.

If this seems not enough, you can try to experiment with overclocking. Exploring the possibility of HyperX Fury HX424C15FBK4 / 32, we were able to achieve stable operation mode set in DDR4-3000. To do this, it took until the supply voltage of 1.35 V.

Before major benchmark, session can still play with the timings, identifying the best combination for maximum effect, but they are so very good.

Recall that for DDR4 models DDR4-2666 or higher, you must set the parameter CPUstrap position 125 MHz, reducing the CPU multiplier. Such manipulations are often prescribed in the XMP-profile, but they are important to remember during manual tuning.

As shown, all the same to DDR4 radiators are not only esthetic functions. After further acceleration (DDR4-3000; 1,35 V) under load Linx, 0.6.4 coolers in an open testbed warmed to 38-40 degrees. In a closed cabinet, temperature will clearly be higher. In normal mode (DDR4-2400; 1,2 V) radiator shell is not heated above 36 degrees.

Results

HyperX FURY HX424C15FBK4 / 32 – capacious memory speed set a new standard. Four set of 32 GB allows you to close the issue of lack of RAM, even for systems that are used not only as a powerful gaming PC, but also specialized workstations for serious work with graphics and video editing. Set initially operate normally DDR4-2400, without requiring preset BIOS. In this case, the modules have a hefty potential for additional acceleration and compact radiator blocks allow the use of this memory in systems with a large CPU cooler.

Expected retail price HyperX FURY HX424C15FBK4 / 32 – about $ 455. Price impressive, but in general it corresponds to that of the other sets of DDR4-2400 32GB. In case this capacity seems excessive, the manufacturer offers a four-set HyperX Fury HX424C15FBK4 / 16 to 16 GB, buy which will cost about $ 250.

Liked

+ Large volume

+ Good speed settings

+ Automatic mode setting DDR4-2400

+ Compact and quite spectacular radiators

+ Overclocking potential

+ Minimum heating modules under load

Do not like it

– No

Source: Kingston

The post 32 GB high-speed memory DDR4: review HyperX FURY HX424C15FBK4 / 32 appeared first on Raqwe.

Memory – an integral part of any PC. Often her choice not enough attention, but with the right much more important than it seems. And now to our office got a new RAM from Kingston HyperX Savage, which is a very strong challenger.

Series Kingston HyperX Savage was presented by Kingston in September 2014 and replaced the HyperX Genesis. This line is positioned as a RAM mid-range class, having just above the line HyperX FURY, which also has managed in our office. It primarily focuses on enthusiasts, gamers and creators of photo and video content.

Wild RAM – Kingston HyperX Savage

In terms of appearance are all very cool. Kingston HyperX Savage has a very proud that produces memory cards on a black PCB. In combination with a bright red asymmetrical radiator, made from aluminum, looks really cool. Nicks look very aggressively remind the crest of a wild beast, which confirms the name Savage.

Kingston HyperX Savage available in two or four-channel sets of 8 to 32 GB, dialed dies on 4 or 8 GB. Naturally, we have been in the hands of a top grade, because we are steep. Operating frequency range from 1600 to 2400 MHz (1600, 1866, 2133 and 2400), and the voltage can be 1.5 or 1.65 V. Savage chipsets compatible with H67, H97, P67, Z68, Z77, Z87, Z97 and H61 from Intel, as well as with the A75, A87, A88, A89, A78 and E35 from AMD.

In addition a new line of support JavaScript Intel XMP, allowing easy memory literally in a couple of clicks without in the BIOS, and other complexities. This may be a good moment for beginning overclockers, however, if you do it all hands, the result will naturally be better.

One of the most important aspects is the price (it can see here ) on the new series Kingston HyperX Savage, which distinguishes it from its competitors, including the predecessor HyperX Genesis.

The post Wild RAM – Kingston HyperX Savage appeared first on Raqwe.

Company Kingston Technology Company, Inc., Known primarily for its storage devices, has introduced a new gaming headset HyperX Cloud . The model, created in collaboration with the Swedish manufacturer of peripherals for gamers QPAD, different soft ear cushions and large 53-millimeter speakers, which help to achieve maximum comfort and high-quality sound.

According to the manufacturer, ambyushury headset HyperX Cloud filled with a special material, taking the form of the user’s head, and when you create a soft headband used special stitching. These measures are designed to provide not only an attractive appearance, but also the greatest possible comfort during long hours of gaming battles. Headphones used HyperX Cloud Speaker gated eliminating the background noise is not only the gamers, but also the people around him.

“HyperX, together with the Swedish manufacturer, the company QPAD, created a headset that delivers maximum audio quality and exceptional ease of use. The result is a quality product, as QPAD company known throughout Europe by high quality peripherals for gamers – Young said Lawrence (Lawrence Yang), Head of HyperX. – We think that fans of games will appreciate the benefits of our new headset. “

Basis of headphones is made of lightweight and durable aluminum, and the microphone can be removed by turning the headset classic headphones. Headset from Kingston compatible with personal computers, game consoles PS4, smartphones and tablets. HyperX Cloud is the official headset eSports competitions Intel Extreme Masters, Alliance Gaming, CNB e-Sports Club, SK-Gaming and Team Liquid. According to the manufacturer the product is different legendary reliability HyperX, which allows the user to provide a two-year warranty.

The post Kingston is a gaming headset HyperX Cloud appeared first on Raqwe.

In view of the growing demand for high-performance DDR3 modules, as well as the ‘good management of the latest platforms released by AMD and Intel, Kingston has well thought out upgrade their HyperX line with a new high-end DDR3 kits designed for overclocking geeks and in general for performance enthusiasts.

These are the memories HyperX Predator that are now available in dual-channel configuration with a frequency of 2,8 GHz. Kit always presents the classic blue heatsink is optimized for the best cool the chip and the PCB, as regards Instead, we find a specific voltage I / O of 1.65 volts and CAS Latency equal to 12.

The kit obviously supports the XPM so as to set the parameters more quickly in the BIOS of motherboards compatible, in order: Intel P55, H67, P67, Z68, H61, Z77, Z78 and AMD A75, A87, A88, A89, A78, and E35 (Fusion).

No info on the price at the time.

The post Kingston HyperX Predator DDR3 memories up to 2.8 GHz appeared first on Raqwe.

New product is compatible with mobile devices running iOS and Android and allows to wirelessly access the content stored on a USB-drives and memory cards format SD / SDHC / SDXC, and microSD / SDHC / SDXC.

Furthermore, the device can also be used as a charger for mobile phone.

MobileLite Wireless card reader allows you to bring and share data with three users simultaneously, and supports three simultaneous connections to the device and the router through a network of Wi-Fi. That way the user can simultaneously streaming music and surf the Internet.

Special application to work with MobileLite Wireless card reader is now available for devices running iOS and Android. In the near future, there is support for Windows 8 and Mac OS.

Dimensions of the card reader Kingston MobileLite Wireless are 124.8 h59, 9h16, 65 mm, weight – ’98 According to the manufacturer, the battery life of the device is up to 5 hours.

The post Kingston has introduced a new generation of wireless card readers MobileLite Wireless appeared first on Raqwe.