Feature of utilitarian knives Camillus DAGR and Camillus SKOL

New utilitarian knives are manufactured from virtually identical materials, to complete the tail blade selected high-carbon steel with a hardness of 1095 brand within 56-58 HRC. The handle Camillus DAGR constitute solid material to form the lining of the G10 while Camillus SKOL have a two-part structure – a combination of Micarta and G10. Three pairs of pads are fixed by Torx screws and hex, respectively.

Full-length Camillus DAGR equivalent to almost 267 mm, length of the blade with a partially sharpening is 124 mm. Camillus SKOL length is not exceeding 267 mm, but the length of the blade with partial sharpening and hook is not more than 120 mm. Blade thickness at the butt and the total weight of the blades is not specified. Both models are equipped to form a sheath of thermoplastic Kydex.

Presented utilitarian knives Camillus DAGR and Camillus SKOL available for pre-order and is estimated at $ 270, 100% of the money earned will be allocated to a fund to support US Special Forces veterans and their families. Sending all orders scheduled for September this year. Knives are manufactured in the United States.

Source: camillusknives

The post New utilitarian knives Camillus DAGR and Camillus SKOL appeared first on Raqwe.

German brand Böker knife Outdoor knives line added a new model called Böker Field Butcher. This model was developed by the Danish design master Jesper Voxnæs.

 It was based on the classical form of Japanese blade kitchen knife Santoku. At the same time, the designer took into account the necessary characteristic properties Outdoor knife. Let’s look at the characteristics of a knife Böker Field Butcher closer.

Specificity of the Böker Field Butcher

The design of the knife Böker Field Butcher provides full-tail blade. The blade is made with stainless steel of N690 with the stated hardness in the range 58-60 HRC. Ergonomic handle complement the lining of the dark green material Micarata. Pads are attached two types of rivets. The possibility of fixing Lanyard.

The length of the working knife Böker Field Butcher equal to 259 mm. The complete length of the wide blade of at least 136 mm. Maximum thickness to butt up to 4 mm. The total weight of the knife, without regard to the sheath of a fully black genuine leather, declared at the level of 230 grams.

Conclusion of the Böker Field Butcher

Working Outdoor Knife Böker Field Butcher has good features for its intended purpose. Forms and materials are very well matched to the knife.

The knife is now available for pre-order on the official website of the company. Knife Böker Field Butcher will have the cost of the order in the range of 230 euros. The first shipment is scheduled for early July this year.

Source: Boker

The post Böker Field Butcher a new working knife design Jesper Voxnæs appeared first on Raqwe.

Next week, the famous German brand knife Böker send on sale new knife with a fixed blade Böker Savannah Hirschhorn, who will be part of a separate premium line of knives for hunting. Manufacturer allocates an effective form of new blade knife, as well as the use of traditional natural materials to create a handle.

Blade Böker Savannah Hirschhorn has design and is complemented by a steel hilt. To create the blade is stainless steel grade N690 with the stated hardness in the range 58-60 HRC. The handle of the knife form two plates of processed antler, leather is fixed by three studs on the end of an opening under the lanyard.

Length Böker Savannah Hirschhorn equals 228 mm, the total length of the blade at least 116 mm, the maximum thickness at the butt does not exceed 3.4 mm. The total weight of the knife, without taking into account the weight of the sheath of thick leather, is 184 grams.

Start a new retail sales for hunting knife Böker Savannah Hirschhorn should start on March 27, the recommended rates are in the range of 260 euros.

Source: Boker

The post HUNTING KNIFE BÖKER SAVANNAH HIRSCHHORN appeared first on Raqwe.

Earlier this week, the American brand knife Bark River Knives, founded by Michael Stewart (Mike Stewart), has released a new hunting knife Featherweight Hunter, whose design is based on the model Classic Drop Point Hunter, developed by the American master Bob Loveless (Bob Loveless) back in early 1980 th year. Featherweight Hunter smaller and much easier to base model. Suitable for both hunting and for bushkrafta.

Design Featherweight Hunter provides blade, straight blade made of stainless steel Bohler Elmax with the stated toughness within 60-62 HRC. Handle the basic model form lining material Micarta, which are available in different color options. The full length of the knife a little more than 184 mm, length of the blade almost 83 mm, the length of the cutting edge is not more than 79.4 mm, the width of the blade 19.7 mm, the maximum thickness at the butt – 2.16 mm. The total weight of the knife about 71 grams.

Included with each knife Featherweight Hunter supplied sheath of thick leather. The final cost of the knife depends exclusively on the choice of pads on the handle, only 117 available variations may choose among different colors Micarta, the cost of which starts with a mark of $ 200, because of the more premium materials, including various breeds of wood, bones and horns of animals, as well as bone and mammoth tusk. The cost of these options can reach in excess of $ 400 per set.

The post Featherweight Hunter – new and modern knife hunting from Bark River Knives appeared first on Raqwe.

In addition to a large number of new products in a series of folding knives, knife American company CRKT (Columbia River Knife & Tool) has not left unattended and a collection of knives with a fixed blade, all presented nine new models. Detailed focus only on the most interesting, authored by masters Pat Crawford and Wes Crawford, Lucas Burnley, Larry Fischer, Abe Elias and AG Russell.

Pat Crawford (Pat Crawford) and his son and Wes (Wes Crawford) presented this year’s knives Thunder Strike and Drumfire, which are mainly designed to be worn on the neck. All-metal knives are manufactured using 8Cr13MoV steel with a hardness within the stated 56-58 HRC. Full-length blade Thunder Strike, which is supplemented by winding the handle of the 550 th Parachute cord is almost 189 mm, length of the blade about 72 mm in thickness at the butt – 3.6 mm. The total length of the model Drumfire not exceed 146 mm Blade length of 58 mm, the thickness at the butt – 2.8 mm. Both models are equipped with a sheath of nylon reinforced with fiberglass and evaluated by the manufacturer 50 and $ 40 respectively.

In addition to new models of folding knives, American designer Lucas Burnley developed two fikseda with names Akari and Achi, knives have a common design and are made of identical materials. In both models polnohvostovoy blade made of 8Cr13MoV steel with a hardness of at least 56-58 HRC. Handle form the lining of nylon reinforced with fiberglass and winding of the Parachute cord. Akari knife reaches 162 mm in length, the blade about 72 mm and the thickness at the butt of almost 3.6 mm. Full-length model Achi equals 159 mm, length of the blade 72 mm, thickness 3.6 mm on the butt. The recommended cost $ 60 new products, complete sheath of nylon reinforced with fiberglass.

Hunt’N Fisch – new small knife for hunting and fishing have created the design of the late master Larry Fisher (Larry Fischer). Polnohvostovoy knife blade is made with reconciliation steel 8Cr13MoV, the hardness of steel is declared at the level of 58-60 HRC. Handle form the lining of the virgin material G10. The total length of the new blade is slightly more than 184 mm, length of the blade does not exceed 76 mm thickness at the butt – 3.3 mm. The knife comes with a sheath of leather, the value set in the range of $ 100.

The new knife Saker, custom-design Abe Elias (Abe Elias), will be chatyu collection of knives for hunters. The blade of the knife is made of carbon steel 1075 steel hardness within 50-55 HRC. Ergonomic handle create two brown lining made of natural walnut. The full length of the knife a little more than 233 mm, the length of the blade is equal to 115 mm and a maximum thickness of 3.6 mm on the butt. Complete with knife sheath sold from a dense skin and a small tool to bushkrafta, the declared value of the complete set – $ 125.

Kinzhalopodobny knife Sting 3B with double-edged blade designed brand AG Russell, the basic model Sting, presented in 2012. New blade is positioned as a developer compact and lightweight knife for self-defense. The blade is made of steel 8Cr13MoV, black textured lining made of a material G10. The total length of the new blade is nearly 183 mm, length polnohvostovogo blade does not exceed 87 mm in thickness at the butt just 2.27 mm. The suggested retail price of the knife does not exceed $ 60, complete sheath of nylon reinforced with fiberglass.

The post New and modern knives from Fixed Blade CRKT 2015 appeared first on Raqwe.