So how do you perform a Hard reset Kyocera Hydro Air and why is it needed? Hard reset Kyocera Hydro Air is advised to apply if your smartphone does not work consistently, or the use is not as comfortable as it was at purchase. Hard reset Kyocera Hydro Air can be made in several ways, which I will discuss below. Before hard reset it is recommended to make a backup copy of important data.

Method 1 Hard reset Kyocera Hydro Air: Settings menu

This option uses a standard feature, which is available on every Android device.

We need to go to Settings – Backup and Reset – Reset. After that you will be warned about the fact that all data will be deleted, and then you should click the button “Reset”. It will be necessary to confirm your choice by clicking “Delete all” and then the system will restore to factory settings.

Method 2 Hard reset Kyocera Hydro Air: Service code

For its realization you just need to open the number entry and dial *2767*3855#. This immediately starts the process Hard reset Kyocera Hydro Air. No confirmation from the user will not be prompted.

Method 3 Hard reset Kyocera Hydro Air: Recovery menu or wipe

What is it and how to make Wipe on Android?

You need to turn on the device at the same time you have to press the button “Power”, “Volume Down/UP” and or Home button. The combination of buttons depending on the model of smartphone. When recovery menu will be loaded, you need to select “Wipe” section and confirm your selection by pressing Power button or Home button.

That’s all! You can use one of three ways hard reset Kyocera Hydro Air.

The post Hard reset Kyocera Hydro Air appeared first on Raqwe.

As already mentioned, if you have enabled Google Sync, you can easily return back all the data to smartphone and re-install all games. If synchronization is not necessary, but you want to save the information before Hard reset for Kyocera C6740N, make backups of data using the developer software.

All the process of hard reset can be divided into 2 parts: enter the menu and select the desired item. Just say that sometimes it is impossible to start the menu that you need. We will try to Hard reset for Kyocera C6740N through the system Recovery menu.

Remove the memory card and SIM card. Then turn off your smartphone.

It is necessary to turn off the smartphone before pressing a combination of any keys. Different devices have different combinations of keys to enter system menu.

Below are the combination of keys. WARNING you need to hold certain key with Power button. So you have to keep the 2-3 keys down for 5 seconds until you will see Android logo or any action on your smartphone screen.

• Volume Down + Power button

Once Android logo will appear or any action will be performed on the screen – you can let go the keys.

As a result, you should see a menu with several items. We proceed to the second part of Hard reset for Kyocera C6740N.

Now, you need to find one of the items:

• Reset factory setting
• wipe data/factory reset
• Factory Reset
• WIPE DATA
• Clear Storage

Select a found item. Move by pressing the button Volume Up and Volume Down, to choose from – the Power button.

Perhaps after that appears small submenu, where you need to select delete all user data or reboot system now.

After selecting your smartphone should reboot. I must say that the reboot can be long, from 1 to 5 minutes. Do not worry, it is the process of hard reset for Kyocera C6740N.

The post Hard reset for Kyocera C6740N appeared first on Raqwe.

Hard reset Kyocera Hydro Wave can be done in several ways:

1) Hard reset Kyocera Hydro Wave through smartphone menu: “Menu” – “Settings” – “Confidentiality” – “Factory data reset”. If you cannot find a menu in your smartphone, then you can try another way: “Menu” – “Settings” – “Backup and reset” – “Factory data reset”. The system asks you to confirm your actions – you will need to click “OK”.

2) Also, Hard reset Kyocera Hydro Wave can be done via the service code *2767*3855#. If you enter this code using normal dialing hard reset Kyocera Hydro Wave will be performed instantly without requiring confirmation of the action. Such a method completely erase all data on your smartphone.

3) Next option is hard reset Kyocera Hydro Wave via the boot menu. You need to press and hold Volume Down button and Power button. After that you’ll see a menu on the smartphone screen. You should find a menu item Wipe and confirm the hard reset Kyocera Hydro Wave.

4) Recovery Mode is a special mode in which the flashing device is held. To do this, you need to install CWM (ClockworkMod Recovery) – a program necessary for any smartphone that can be found on the Internet for any type of operating system. After it is installed, run it with the help of Adb Reboot Recovery and go to Wipe Data, select Factory Reset and click on it. This method of hard reset Kyocera Hydro Wave is suitable for professionals because it is held only in the most extreme case, when all the previous methods do not help. All other ways are available to any user, even the new owner of the smartphone with Android operating system.

The post Hard reset Kyocera Hydro Wave: 4 working ways appeared first on Raqwe.

Moisture and strokes are not afraid of the product. The gadget is able to dive to a depth meter (30 minutes), as well as a fall from a height of 1.5 m.

Features of protected smartphone

These “tricks” does not bring any harm. How? With the support of the standards MIL-STD 810G and IP57. Not bad for such an affordable model.

Unfortunately, the developers Kyocera decided to save on the screen. New 145-gram protected smartphone has a 5-inch panel with a modest resolution of 960 by 540 pixels.

As the processor uses 4-core chip Qualcomm Snapdragon 410. The platform operates with a clock frequency of 1.2 GHz. There is 1 GB of RAM and SSD 8GB.

Also on board there is a slot for microSD, Bluetooth 4.0, a front lens 2 megapixel, GPS, Wi-Fi 802.11n, the battery capacity of 2300 mAh, and the main camera of 5 megapixels.

With regard to size of protected smartphone, they are equal 143.8 x 72.3 x 10.7 mm. Managed by Hydro Wave operating system Android 5.1 Lollipop.

Source: kyoceramobile

The post Kyocera Hydro Wave: new protected smartphone from water and downs for $ 150 appeared first on Raqwe.

Impressive, however, the other – an unusual approach. Earth in Japan is small, so the solar power station built right on the water. Let’s look at the main features of the solar power station.

Features of solar power station

One such company opened in Hyogo Prefecture. It is the largest swimming complex in the world. It can annually produce 2.3 MW.

Created in collaboration with other corporations – Century Tokyo Leasing. The key point is a system does not exist for the sake of beauty. Its objective practical – to serve the next household.

Electricity for households will buy a regional provider of Kansai Electric Power.

It is noteworthy that the above – only part of an ambitious plan. By the end of this year, Kyocera will build a set of similar facilities throughout Japan. Their combined capacity will be approximately 60 MW.

Conclusion of solar power station

New floating solar power station will help many areas to conduct electricity. A promising alternative to nuclear power. Especially after the incident at Fukushima.

Source: RechArgeNews

The post Japan launched a floating solar power station appeared first on Raqwe.

Buy smart, able to survive a little dive – for a long time is not a problem. It is enough to take one of the top devices Sony (for example). Let’s take a closer look.

However, most of these devices are protected exclusively by fresh water. Familiarity with the sea for any “smart” phone will end badly.
But every rule has an exception. Kyocera Torque G02 is the case. Salty source device does not terrible. Let’s look at the main features of the phone.

Features of the Kyocera Torque G02

The product is a real “SUV” smoothly functioning under extreme conditions. The novelty is not afraid of dust, moisture, shock and extreme temperatures.

The gadget is fully complied with IP58, IPX6, and MIL-STD-810G. In view of the above items – the dream of a novice diver. The presence of the front lens and 5-megapixel main camera 13-megapixel (1080p capture video at 30 frames per second).

As for other features, Kyocera Torque G02 offers users a 4.7-inch IGZO-screen with a resolution of 1280 by 720 pixels. Display durable – thanks to glass Dragontrail X Glass. For adequate performance meets the 4-core chip Qualcomm Snapdragon 400 processor with a clock frequency of 1.4 GHz. In the role of graphics accelerator Adreno 305 acts.

Phone Kyocera Torque G02 offers 2 GB of installed RAM and 16 GB of permanent storage. In addition, there are microUSB, a slot for microSD, the wireless charging Qi, the battery is 2910 mAh.

Thickness Kyocera Torque G02 is 14.2 mm. Sales will start in the near future. Available 3 colors body is green, red and black.

Conclusion of the Kyocera Torque G02

Phone Kyocera Torque G02 offers good performance, with good protection.

Source: gsmdome

The post Kyocera Torque G02 works even in seawater appeared first on Raqwe.

The Japanese company Kyocera unveiled at MWC prototype smartphone that can get energy from the sun’s rays. At the same time serves as a photocell device screen – it works as a solar battery.

The display is a structure and several layers, one of which is transparent photovoltaic material Wysips Crystal, allowing to convert solar energy into electrical energy without any problems. The productivity of the material is approximately 5 mW / cm2, and the thickness – 0.1 mm.

According to the developers, the screen does not generate this amount of energy, which is enough to fully charge the phone battery. However, the partial charge replenishment is possible in a place where many solar energies.

Source: Gizmag

The post The Kyocera introduced the new phone with display solar cell appeared first on Raqwe.

Not just Apple iPhone 6 Kyocera also intends to bring sapphire crystal glass smartphone.

According to multiple sources pointed out, Apple iPhone 6 will use the sapphire crystal glass with anti-scratch ability to enhance the rigidity of the panel, which has been doing the protective mobile phone brand Kyocera, will launch its own sapphire crystal screen, called Sapphire Shield.

What is the Kyocera?

Japanese operator KDDI released a new machine, for example in the summer, Kyocera launched a model for TORQUE G01 products, support waterproof, dustproof, anti-shock, anti-vibration, anti-sun, moisture, high temperature resistant, anti- Low and brine future if further use sapphire crystal glass, protection is bound to be improved.

Most of the current high-end smartphones, and other brands are using Corning glass panels, in addition to the price is cheaper, but not fragmentation is its advantage.

Sapphire crystal Mohs hardness of up to 9, after the Mohs hardness of the diamond 10, compared to the price of the diamond, sapphire crystal relative price of many inexpensive, but the cost is in the same size and Gorilla Glass 3 glass 10 times.

It is worth mentioning that, sapphire crystal glass ductility less Corning Gorilla Glass 3, when faced with unbearable pressure directly and easily broken; However, according to recently released information and a video display, which is part of the problem seems to have been improved .

Kyocera brought Sapphire Shield sapphire crystal glass, in addition to its own products will be used, but whether it will be used for other brands of smart phones, there are still generations confirmation; if relevant information, Reqwe will continue to concern.

The post Not only the iPhone to use Kyocera will launch sapphire crystal glass appeared first on Raqwe.