The main task, which is placed in front of this device to expand wireless coverage at a given site by you in the shortest possible time and with minimal involvement on the part of the settings by the user.

Design of the new amplifier Wifi

It so happened that the test is not deprived gadget beautiful design, so to speak about the appearance will not be superfluous. The body of the model amplifier Wifi TL-WA850RE plastic. White glossy leaves on themselves visible fingerprints. The design is not big in size (110.0 x 65.8 x 75.2 mm) and almost monolithic, so comments on the assembly there is absolutely no. We can say that the amplifier is easy to fit into any modern interior, although the embodiment of the housing in black also is in demand.

Dimensions and clever design of the test device allow to place it directly on the wall outlet. It should be noted, if the TL-WA850RE migrate from one place to another after the first installation of further action by its conjunction with a router is not required.

With regard to the remoteness of the transmitter and repeater, the practice has shown that the largest area coverage and signal strength will be in the event that burn at least 3 of the 5 LEDs on the right of the circle of a single button. The latter, in addition to the LED-backlighting, still surrounded by symbols and text. Diodes shine brightly, perhaps the manufacturer was worth slightly to extinguish them because the main task of the device is not evident – and properly perform its main function. To actually move it.

Feature of TP-LINK TL-WA850RE

Assign the main unit (in this case the amplifier Wifi TP-LINK TL-WDR3600) and TL-WA850RE was very simple. The router simply clicks WPS, and the amplifier – RangeExtender. By the way a sequence of keystrokes is not important, the main thing is not to delay (left about 2 minutes), and to wait at the repeater after a procedure done indicator lights RE. This would mean that everything is done correctly and coverage Wi-Fi network is increased.

Performing above procedure offers the possibility to connect your laptop, smartphone or tablet to your home network in places where previously did not get a router. For non-small apartments in high-rise building so you can eliminate “dead zones” and come out to the WAN on the balcony, and a private home, for example, to provide wireless internet access on the porch or in the loft. So now in these places will be not only enjoy surfing on your favorite sites, and watch a remote high-definition video, listen to streaming audio and online play. And because the amplifier supports data rates up to 300 Mbit / s and is guaranteed to work with all standard wireless devices 802.11b / g / n.

An important and useful functionality amplifier Wifi TL-WA850RE should be named and built-in Ethernet port. Thanks to him, you can get rid of the layout of the apartment wired network devices that do not support Wi-Fi. It does not apply to the new game consoles or smart TVs last generation, but may come in handy if the house has a PC, media player or receiver requires a connection or an online file storage.

Clear the memory of the amplifier is already stored therein profiles wireless networks can click Reset. It is located on the bottom near the Ethernet port.

Verdict of the new amplifier Wifi

Well, amplifier Wifi TP-LINK TL-WA850RE in a sense, can be called the savior of home interiors from excess bulky equipment and cables. This device in a compact and attractive design, just a couple of minutes, solves the problem of expansion of the area of the wireless network and provides fast data transfer on mobile devices, and on the stationary PC via the Ethernet connection.

Pros of amplifier Wifi:

• prompt decision to extend the existing wireless network
• quick to install and configure the network
• compact size
• data rates up to 300 Mbit / s (IEEE 802.11n / g / b)
• Ethernet port for connecting devices without Wi-Fi support

Minuses of amplifier Wifi:

• the device is available only in a single color

Source: Tp-link

The post Review amplifier Wifi signals TP-LINK TL-WA850RE appeared first on Raqwe.

This is a real godsend for those who care about security. An excellent solution for monitoring the office or home. Let’s see the main features of the device.

Features of TP-LINK NC450

A key feature of the model – the rotating mechanism, which allows to monitor the whole room, not just individual sectors.

Another positive point – the video is broadcast in HD-quality. Dealing with the fuzzy muddy picture is not necessary. With regard to viewing angle, they are quite respectable 120 degrees vertically and 300 horizontally.

The invention is equipped with motion sensors and noise. Attackers can not approach unnoticed. The product, even the darkness is not an obstacle – infrared LEDs provide visibility up to 8 meters. If you notice suspicious activity, TP-LINK NC450 owner sends a notice by e-mail or FTP. Recording an event is conducted on a memory card microSD.

A useful bonus TP-LINK NC450: unit supports two-way audio communication. What? For remote communication with employees, family, and pets. By means of the application of the companion tpCamera. The program is used to configure and control the gadget.

Conclusion of TP-LINK NC450

TP-LINK NC450 has a superior function and can be a very powerful camera for its competitors. The release date and price will be announced later.

Source: TP-LINK

The post TP-LINK NC450 – the new cloud IP-camera appeared first on Raqwe.

Router TP-LINK Archer C2 – one of the most affordable devices with support for Wi-Fi 802.11 ac in the line producer. Working in two frequency bands, the router has a total bandwidth of 733 Mbit / s, and subject to the availability of gigabit LAN-ports and one USB, before us is one of the most affordable options for building a modern home network.

TP-LINK Archer C2 comes cardboard box, decorated similarly to other products of the brand. In it you will find: Archer C2, two detachable antennas with a gain of 5 dBi power adapter cable Ethernet, CD with software and documentation.

Design, connectors

Relatively already sells equipment TP-LINK, Archer C2 looks pretty cool, it does not look like older brothers Archer C5 and C7. The upper part of the body has a slightly curved profile, a design course allows the router to look thinner than it actually is. The upper surface of embossed and glossy, beautifully tapered pattern shimmers in the light, but on such a surface is better visible dust or fingerprints.

Top you can see the silver logo of the manufacturer and the number of point green LED indicates the status of the device.

The rest of the body is made of matt brushed plastic it done a lot of holes for ventilation. At the bottom, you can find service information. All connectors TP-LINK Archer C2 traditionally gathered on the back side.

Between the two RP-SMA antenna connectors can be found socket power supply, the power button on the router with the fixation, one USB 2.0, Gigabit Ethernet ports LAN (4 pcs.) And WAN, power key Wi-Fi network and paired button WPS / Reset.

Functionality

Router TP-LINK Archer C2 is based on the processor MediaTek MT7620A, running at 600 MHz. He is responsible for the system and the processing of traffic passing through the LAN-ports. The amount of RAM is 64 MB and Flash-storage capacity – 8 MB.

Wireless network standard 802.11 b / g / n 2.4 GHz processor provides MediaTek MT7620A, antennas operate in a MIMO 2 × 2: 2, and the maximum data rate of 300 Mbit / s. Chip MediaTek MT7610E provides network performance 802.11 a / n + ac at a frequency of 5 GHz antenna configuration – MIMO 1 × 1: 1, and the maximum speed can reach 433 Mbit / s.

TP-LINK Archer C2 supports a standard set of security protocols and authorization schemes in networks of providers.

Interface

Corporate Web configuration interface Archer C2 accustomed to other routers TP-LINK. Preferences window is divided into three columns. The first displays the items and sub-menu, the second is tuned in different settings, and the third is collected reference information.

While the router is not enrolled in a broad sell, so the interface is available in English only. On the whole, it contains the usual setting items: general status information, tools for firmware upgrade, configuration backup and restore factory settings. Configure wireless networks each particular range rendered as a separate item. In each of them, you can create one guest Wi-Fi network.

To the USB port, you can connect a printer or storage device to organize network storage, media server or FTP-server. There are parental control and other settings.

In addition, there are mobile apps for Android and iOS . The program allows you to view a list of connected devices to block customers manage parental controls, to produce basic configuration of the router – disable the network, change passwords, reset settings.

Operation

Router TP-LINK Archer C2 was used as the primary network device in a building more than a month. During the operation we did not have claims to the speed and stability of the device. He successfully coped with a constant load, which provided two PCs and three smartphone connected via Wi-Fi.

For measurements we used a laptop Asus ASUSPRO BU201 c Gigabit Ethernet-adapter Intel I218-V and Wi-Fi-module Intel Wireless-AC 7260 (802.11 ac / a / b / g / n, 2,4 + 5 GHz, 2 × 2 , 300/867 Mbit / s).

Test check speed via Ethernet-connection shows almost the maximum for a 100-megabit connection result.

Then we switched to channel Wi-Fi (2,4 GHz) and measured the speed at four points: in close proximity to the router at a distance of 5 meters in the next room separated thin wall in the next room, separated by the same thin wall at a distance of 8 meters, at a distance of 13 meters through the bearing walls and other noise. The first two points fall velocity is practically not observed, it is noticeable at large distances, while maintaining a reasonable data rate.

Network signal at each point of the next expected weakening.

If the farthest point of the laptop demonstrates the unenviable data rate at 20/8 Mbit / s, stationary PC with Wi-Fi module Qualcomm Atheros AR946x (802.11 b / g / n, 2,4 + 5 GHz) and two antennas ( 8 dBi) gives a 57/88 Mbit / s.

In the 5 GHz band, the results are generally similar, with the only difference that ASUSPRO, with the support of Wi-Fi 802.11 ac allows you to get much better results in place of a weak signal, while the wireless module PC without the support of high-speed standard shows a much more modest the result.

Note that due to the greater susceptibility of the 5 GHz waves to physical interference in distant points in the room signal falls more than the 2.4 GHz network, although this does not prevent getting normal results with the appropriate customer equipment.

Results

TP-LINK Archer C2 – wireless router with support for current communications standards and the stated data rate 733 Mbit / s. The device can be attributed to the lower-middle price segment – it is much more attractive than low-end models, although behind his older brother. In terms of equipment Archer C2 looks quite attractive – the buyer receives support Wi-Fi 802.11 ac, Gigabit ports for fast wired network and one USB 2.0. At the same hardware base router is not the most advanced, so it can be recommended to build a home network average load, or as a replacement for the older and simpler models.

The post Quick review of the wireless router TP-LINK Archer C2 AC750 appeared first on Raqwe.

The company TP-Link has officially unveiled a new application Tether, intended for administration and management of routers TP-Link via mobile devices running iOS and Android.

The main difference from the Tether based on the x86 architecture means WEB-control is compatible with a set of standards for DLNA, which allows users to transfer media stream is connected to the router from USB-drive on the client device.

Tether app is compatible with iPhone, iPod touch and iPad, are running iOS version 5.1 and above, as well as smartphones and tablets that are running Android version 2.3.3 and higher.

The application is available for download in the App Store and Google Play .

The post TP-Link has announced an application for managing routers running under iOS and Android appeared first on Raqwe.

This is what draws attention at the first contact with the router TL-WR710N is an interesting design and compact footprint. You become more familiar with the latest product of TP-LINK also raise recognition functionality. The device, despite its small size, in terms of functionality virtually nothing inferior increased competition. TL-WR710N can operate in five different modes: wireless router (default), Client, Repeater, Access Point and Client WISP. TP-LINK TL-WR710N ideally suited to both during travel and work in the home or office.

Device is a built-in power supply and plug that allows you to plug it directly into an electrical outlet. As a result we do not need extra cables or adapters. Versatile USB port allows you to connect an external drive and share selected resources in the local network, can also be used to charge smartphones and tablets (guaranteed output voltage of 5V and current of 1A). Also noteworthy are two RJ45 input – the first is a fixed LAN port and the other, depending on the mode of operation, can be used as WAN / LAN.

Router Wireless (default) – allows you to create a local wireless network, in which we can share an Internet connection with multiple devices wirelessly. This mode can be used either at home, work and example in the hotel. Client – allows you to connect to a wireless network devices with only an Ethernet port, such as a game console, media player and television. Amplifier – in this mode, the TL-WR710N enhances signal strength and range of your existing wireless network. AP – the device allows you to connect wireless devices to an existing Wi-Fi network. WISP Client – router allows you to connect to the network wireless Internet service providers and creating your own wireless network.

TP-LINK TL-WR710N is covered by a 24 months’ warranty and is available for purchase for a suggested price of $ 30.

The post TP-LINK TL-WR710N – router with an idea appeared first on Raqwe.